DUROSTICK D-11 SUPERFAST 3Kgr

Rapid, special repairing cement mortar for early resistance. Ideal for tasks that require speed in their execution or delivery. It contains no chlorides or corrosive ingredients. Only with the addition of water, a mixture is obtained, which is working for 7 minutes, while its sklirynsis process starts at 15 minutes.

The endurance that develops in 1 hour is equivalent to that of a simple cement mortar after 24 hours. It has great resistance to frost, moisture, carbonization and corrosion from chemicals such as nitrates, sulfates and chlorides. It exhibits strong adhesion to the substrate, very good workability, minimal shrinkage, while not cracking.

The D-11 SUPER FAST is recommended for safe and fast fastening on grids for interior and exterior plasters, for electrical panels and junction boxes replacing plaster, with comparative compressive strength of 40 times Without the potential risk of corrosion from rain or moisture. It is necessary for hydraulic works in Wells of OTE, PPC and EYDAP. It is suitable for machinery anchorages as well as for the placement of metal grille and columns in concrete walls. It is effective for sealing holes in concrete walls, floors and ceilings as well as for the placement of corner profiles.

1. Surface Preparation

The substrate must be free of flimsy spots and be thoroughly soaked in order to achieve high adhesion.

2. Application

Pour the D-11 SUPER FAST into clean water, at a ratio of 3 kg of mortar to 0.7-0.8 LT water, depending on the application, stirring well until the mixture is homogenized. Each layer is applied in thickness up to 3 cm.