Menu
Your Cart

BISON ACRYLIC SILICONE STICO 30 MINUTES 300ml

BISON ACRYLIC SILICONE STICO 30 MINUTES 300ml
Tags: STRUCTURAL 2, 99€
BISON ACRYLIC SILICONE STICO 30 MINUTES 300ml
3.05€
Ex Tax: 2.46€
  • Stock: 8
  • Model: 6303178
BISON BISON
Add to Cart
Buy Now
Add to Wish List

DESCRIPTION

  • Suitable for waterproofing joints with minimal movement, joints and cracks in door and window frames, window sills, prefabricated elements, stairs, skirting boards, walls, plasterboard, ceilings, corructive slabs and piping.
  • It is also suitable for sealing cracks and tears on interior walls.
  • It sticks to bricks, (spongy) concrete, masonry applications, plasters, wood, glass, ceramic tiles, metal and rigid PVC.
  • It does not stick to surfaces of asphalt, polypropylene, polyethylene, PTFE and silicone.
  • It can be painted after 30 minutes
  • Spreads easily & easy to apply
  • Resistant to moisture and temperatures ranging from -20°C to +75°C
  • Very good spray performance
  • Waterproof after complete solidification
  • Resistant to ultraviolet radiation and weather conditions, for indoor and outdoor use
  • Permanently elastoplastic (max. elasticity 12.5%)
  • Excellent grip without primer
  • Fresh residues are removed with water

    • WARNING

    • Apply only at temperatures between +5°C and +40°C.
    • Any heating of a sealant that has not yet been fully solidified may lead to cracks or even fragmentation of the sealant.
    • After a while has passed, you will
    a liquid crust is formed in the sealant, which however does not affect the properties of the sealant;
  • The surface must be dry, clean and free from dust, rust and grease.

  • INSTRUCTIONS FOR USE

    1. Rotate the plastic muzzle of the tube and remove the protective film made of aluminum.
    2. Re-install the muzzle and cut at an angle to the desired opening.
    3. For best results, cover the ends of the joints with cover tape.
    4. Make sure that the width of the joint is between 4 mm and 20 mm.
    5. Avoid gluing three sides by filling the joint with a foam joint sealing cord or a layer of polyethylene.
    6. Fill the compound evenly with the sealant and lay the surface within 10 minutes with a wet spatula or bison multitoel multitoel.
    7. Remove the masking tape immediately after application. A crust will be created after about 15 minutes.
    8. Silicone can be painted after 30 minutes with colors of aqueous basis and after 2 hours with solvent base paints.

      9. Storage:   Store in a well-sealed package in a dry, cool place, where there is no possibility of ice formation.






       

      ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
      TYPEACRYLIC SEALANT