BISON FAST FIX LIQUID POWER ADHESIVES REPAIR 2 COMPONENT 10gr 27536

Description:

Very fast and powerful repair glue of 2 components with the ability to fill gaps. It is ideal for many kinds of repairs inside and outside the house, even when the surfaces are not tangential. Its gel form allows to be applied in any direction. It corrects and repairs in a few seconds many different materials such as wood, metal, ceramics, stone, glass and plastics* with each other or in combination.*Unsuitable for PE,PP,PTFE

Application:

Ideal for:

It corrects and repairs in a few seconds (about 60 seconds depending on the materials, humidity and temperature levels) many metal objects with each other or in combination with other materials such as wood, ceramic stone and plastics.

It is not suitable for:

Unsuitable for PE, PP, PTFE.

Advantages:

Very fast: about 30
Very strong
Possibility of filling gaps: up to 1 cm
Gel form: application in all directions
It is painted, smoothed
Resistance to vibration, water, UV radiation
Temperature resistance from -40° C to +80° C
Solvent-free
Transparent

Before use:

Working conditions
Application temperature: between +5°C and +25°C.

Surface requirements
The surface must be dry, clean and free from dust and grease. Roughen surfaces with sandpaper (e.g. metals)

Preliminary surface treatment
The surface must be dry, clean and free from dust and grease. Roughen surfaces with sandpaper (e.g. metals)

Impurity ratio
4:1

During use:

Instructions
To assemble the double cartridge remove the black cap from the top of the cartridge and place the white plunger into the syringe. To open the syringe twist (90°) the gray cap and insert the stirrer.Press the plunger and pour the first drops of glue. Apply a thin layer of glue on one side. Press lightly for about 30 seconds. When you are done with the repair, remove the stirrer and put the grey lid back in place to close the syringe so that you can use the product again.

Advice
When doing multiple chores at once, be careful to use the product so that it does not mature in the stirrer about every 25 minutes. If it matures, use a new stirrer. Important: If you run out of agitators you can do the mixing manually with the help of a wooden stick bearing in in place that the glue may not be mixed properly.

After use:

Stains / debris
Remove wet spots immediately with warm water and soap. Seasoned glue stains can only be removed mechanically.

Storage conditions
Store in a dry and cool place.