BISON FAST FIX2 LIQUID PLASTIC GLUE 2 INGREDIENTS FOR PLASTICS 10gr 27534

DOUBLE FISTULA 10 G

Fast and powerful repair glue of 2 components
 

PROPERTIES

• Very fast:about 60 seconds.
• Extremely strong
• Fill capacity:up to 5 mm
• Gel form
• It is painted and can
• smoothed
• Temperature-resistant: from -40°C / +80°C (for a short period of time up to +120°C)
• Water resistant
• Solvent-free
• Accurate and clean application
• Transparent

IDEAL FOR

It corrects and repairs in a few seconds (about 60 seconds depending on the materials, humidity and temperature levels) many plastic items such as PVC, polystyrene, polycarbonates, ABS and PMMA with each other or in combination with other materials such as wood, ceramic stone, rubber and glass.

 

BEFORE USE

Working conditions

Application temperature: between +5°C and +25°C.

Preliminary surface treatment

The surface must be dry, clean and free from dust and grease. Roughen surfaces with sandpaper (e.g. metals) 

DURING USE

Instructions

To assemble the double cartridge remove the black lid from the top of the cartridge and place the white plunger into the syringe. To open the syringe, turn (90°) the grey lid and insert the agitator. Squeeze the plunger and throw away the first drops of glue. Apply a thin layer of glue on one side. Press lightly for about 30 seconds. When you are done with the repair, remove the stirrer and put the grey lid back in place to close the syringe so that you can use the product again.

Advice

• When doing multiple chores at once be careful to use the product so that it does not mature in the stirrer about every 35 minutes. If it matures, use a new stirrer.
• Important: If you run out of agitators you can do the mixing manually with the help of a wooden stick bearing in in place that the glue may not be stirred properly.

AFTER USE

Stains / debris

Remove wet spots immediately with warm water and soap. Seasoned glue stains can only be removed mechanically.

Storage conditions

Store in a dry and cool place.