DS-220 DUROSTICK 25 Kg Elastomer Waterproofing

Eλαστομερές στεγανωτικό ταρατσών DUROSTICK DS-220

1,0-1,5 kg/m2 per two coatings depending on the substrate

8 Years Warranty

Coated elastomer acrylic rubber for roofs with increased waterproofing requirements. Creates a white protective film with excellent adhesion to the substrate. Due to its high measure of elasticity, it can absorb even very intense contractions without additional armament. Protects surfaces from moisture, which affects the reinforcement of concrete.

Advantages

• It is distinguished for its excellent resistance to extreme weather conditions, maintaining its properties at temperatures from -30 oC to +100 oC.
• Resists corrosive gases in the atmosphere, carbon dioxide, sulphur oxides, chlorides, etc.
• It contains new generation UV filters resulting in its long-term resistance to the destructive action of the suns rays.
• It offers the possibility of passability without sticking.
• It has a great ability to bridge cracks in the substrate and does not pop if new ones are created.
• It has excellent resistance even in stagnant waters.
• Reduces the absorption of heat from the roof by up to 10 oC due to its reflective capacity caused by its exceptional whiteness.
• Minimizes the risk of moisture concentration in the substrate and the growth of mold internally, as it is permeable by water vapour.

The DUROSTICK DS-220 is easily coated on roofs, roofs to be lined with tiles, corners, edges, compounds with rat-lead, balconies and planters. Recommended for substrates such as: concrete, garbilo mosaic, wooden surfaces, asbestos cement, cement boards.

Form - Color: Dense paste - White
Elasticity (asTM D 412): After maturation of 8 days and in a membrane 1mm thick, the elongation during breakage was found 400%
Special weight: 1.40±0.05 kg/lt
Full waterproofing: 7 atm v DIN 1048
Moisture resistance: At least 8 years
Application temperature: From +8 °C to +30 °C
Temperature resistance: From -30 °C to +100 °C

P.O.E. (Volatile Organic Compounds): Maximum EU P.O.E. limit value (Directive 2004/42/EC) for this product (Category A/c "Smears for external mineral substrate walls", Type Y): 75 gr/lt (2007), 40 gr/lt (2010). The ready-to-use product contains a maximum of 17 gr/lt