Mercola - Spray Teak Oil Colorless 400ml - 5617

Mercola - Spray Teak Oil Colorless 400ml - 5617

Teak oil known for its marine applications. 
The special oil composition has excellent penetration by filling the pores of wood. 
It increases the life time of wooden surfaces by replacing the natural oils of wood that are lost with time and the exposure of wood to harsh conditions of intense sunshine and difficult weather conditions. 
It does not create film, it is colorless, offering an excellent finish and highlighting the natural beauty of wood.

Features:

The most effective and friendly protection for hardwoods
Excellent penetration
Prevents wood from cracking and peeling
Prevents staining and graying of wood
Restores the original look of the wood
Ensures the longevity of hardwoods
Easy application

Applications:

Marine applications such as on wooden decks and in every wooden construction of ships and yachts.
Maintenance of garden and terrace furniture that has faded with their use or due to weather conditions.
Maintenance of non-varnished indoor furniture that has faded due to central heating and dry atmosphere.
Finish every new wooden construction that we want to give a natural look while avoiding varnish.

Surface preparation:

Wood sold for construction is usually treated with special preservatives to prevent infestation by organisms and rotting.
Surfaces must be dry and clean from dirt, mud, mold, algae and residues of other materials.
For best results clean the surface with a brush and then with the special wood cleaner to restore the natural color of the wood.
Rinse the surface with plenty of water and let it dry.
Smear the surface with fine sandpaper if necessary and remove dust.
If the surfaces have old varnishes or varnishes they must be removed with corrosive D-26.
To avoid the formation of stains, it is recommended to cover the floor with nylon.

Application:

Shake the spray very well before use.
Hold the container in an upright position and evenly spray on the surface from a distance of 25 - 30 cm. 
Apply up and down and left to right. After 15 minutes remove excess material with cloth.
For softwoods, or for woods exposed to harsh weather conditions, a second pass after 8 hours is recommended.
After application, turn the spray upside down and spray until only gas comes out to clean the valve.
Drying time: to the touch 2-3 hours depending on the surrounding conditions. 
Wait at least 24 hours before heavy use of surfaces or contact with fabrics.