Multlock CTT4S01 Double cylinder lock, for TESIO replacement

Armored Doorsecurity lockWith double cylinder, by Mul-T-LOCKCompany, with CTT4S01code.  

Lock for securitydoor, with cylinder (new type). Double cylinder, which means it has an extra fixed lock (block). New operating system with catapult (relock). It is combined with an 80mm security navel (30-50) and a protective cover (defender). Suitable for replacement of Tesiotype locks. With 4 Pirroys, tongue down and fixed lock (block). Center 73mm. 

• Suitable for Tesio lock Replacement
• Replaces the same type of locks. That is, to use this lock, there should already be a same type on the door. Otherwise, it wont suit you.
• In the fixed block is placed a Cylon of half* *, which has a positle on one side. Usually its dimension is 60mm (50-10). If it is a lock from an old type (safe) to a new cylinder, the cylinder is removed from the old lock and is used in the new one.

* * In some cases the cylinder placed on the fixed lock may be bigger in dimensions of 80mm (30-50) and come out from the outside side of the door. It can be used from the outer side as a second lock.

For a perfectly complete solution, you can combine the cylinder lock with the catapult you selected, with aSafety cylinder and a last name defender.

How will you understand if you need a left or a right?

From the outside to the inside (as you enter) if the door opens to the right (clockwise), you need a right lock. If it opens to the left, then you need a left.

How to measure the lock dimension?

With the door open and On the external side, you will measure the distance from the center of the key socket to the POINT where the pirroi begin to emerge. To help yourself, place the key on the door. Caution, if the dimension you will measure is up to 70mm (e.g. 65mm, 68mm) then the lock you will be charged is most likely to be 63mm. From 72mm to 80mm (e.g. 75mm, 78mm) The lock you will need is most likely to be the 73mm.