TURBO-FIX 80ml TRANSPARENT ADHESIVE BLISTER 98435

The TURBO-FIX adhesive and mounting system is a material of adhesion and sealing, of high quality, of one component, Environmentally friendly.

With elasticity and ability to paint. It is constructed on the basis of the prepolymeium.

It is used in elastic solder, sealing and waterproofing, on smooth and uneven surfaces, in aluminium constructions and metal, patios and canopies, polycarbonate constructions in the steel industry, in air conditioning and refrigeration constructions, In the construction of vehicles, wagons and container, as well as in their repairs, in maritime constructions, in shipyards, in electrical, plumbing and sanitary ware, in carpentry, as well as in all constructions.

Permanent Elastic Adhesive

Resistant to time, corrosion and moisture

Environmentally friendly product

Paintable

Odorless

Ideal for outdoor and indoor use

It doesnt spoil the silver in mirrors.

Hardens without breaking or rubbing

Electrical Installations: Support of plastic and metal channels-electrical boxes and tables.
Aluminium Constructions-Polycarbonate: Support-waterproofing-assembling-insulation in aluminum frames with aluminium, (raw-painted), glass, plexiglass, polycarbonate, galvanized-bare sheet metal, coloured metals, steel etc .
Sanitary ware-Baths-Sinks: Waterproofing of joints in bathtubs-support basins and bath accessories-gluing tile, porcelain, ceramics-acrylics.
Carpentry-Furniture: Waterproofing of kitchen stalls with sinks and tiles-support of floor covering and skirting boards.
Glassworks-Kathrepropoiia: Support Mirrors-glazing-waterproofing of glass structures.
Shipping: Construction, maintenance and repair of ships and YACHTS (hard PVC, tires, rubber, glass, wood, aluminum, stainless steel etc .)
Automotive: Elastic gluing & insulation for movable parts of cars and motorcycles.
Building Works: stolies-Fillings-waterproofing-insulations-constructions and repairs to pursterium-polycarbonate materials, polyurethane, minerals and epoxy resins.

Features-Properties: does not contain silicone, acrylic, solvents, P.V.C., and isocyanates. The drying of theTURBO- FIXadhesive depends on the thickness of the joint, the prevailing air humidity and the temperature. (Treatment temperature is + 5o C up to + 30o C). The elastic ligament and sealing that is created absorbs tireless vibrations, oscillations and vibrations.
The solidified mass of the adhesive, presents the following strength:
Good * in water, alkali solvents, diluted inorganic acids and salts, oils and fats. Less good * in aromatic solvents, concentrated acids, chlorinated hydrocarbons. It has long-lasting resistance to aging, corrosion and rot without collecting fungi and bacteria. Withstand temperature from – 30 °c to + 90 °c (up to + 180 C for a while). The paint should be done before drying the glue. 

Application Instructions: The surfaces must be clean, dry and free from powders, oils and fats. Grate the surfaces with sandpaper thus increasing their adhesive capacity. The application of TURBO-FIX, glue is made with a device (pistol type). The cartridge is cut over the thread, the nozzles nose is screwed, and depending on the dimension of the joint, it is cut sideways. For better contact with the edges of the joint, hold the appliance to pressed the Material with pressure on the edges of the joint. Avoid air inflow! The thickness of the adhesive to be used depends on the surface of the materials to be glued. The soldering surface must be applied within 7 minutes and if necessary to adjust. The leftover glue is cut with a spatula or knife.

Cleaning: for cleaning tools and surfaces from the remnants OF TURBO-FIX Glue we recommend the use of TURBO-CLEANER or the accustomed solvents of the trade.

For special attention: The above data are based on laboratory analyses and practical applications. Due to the diversity of materials, working methods and local conditions, on which we can not exercise any influence, we have no responsibility with the use of clumsy or and of the glue. Our recommendation is to carry out many tests yourself. For the rest we refer to our general corporate rules that are in effect.

Base: Prepolymeio, hardened in moisture.
Color: white, transparent, black, grey and brown.
Density: approx. 1.54 g/ml and membrane creation: approx. In 10 minutes *.
Solidity: pastoid, with good stability.
Tightening speed: approx. 2 millimeters in 24 hours *.
Hardness Shore A-DIN 53505:60.
Tensile strength-DIN 53504: approx. 2.2 N/mm2
Fracture dilation-DIN 53504: approx. 250%.
Voltage value 100%-DIN 53504: approx. 1.7 N/mm2
Extra tear Resistance: approx. 14,5 N/mm2
Cleaner: TURRBO-CLEANER or any (Universal) with thinning.
Approved storage time: approx. 12 months in a dry environment, at + 10 °c up to + 25 °c.
Sensitivity to cold: no
Flammable: No
Material Hazard Rating: no such entry.
Odour: Odorless
Shipping Packing: 80ml ampoule, 24 pieces/carton.
• These values were measured at + 25 °c and with air humidity of 65%.