- Stock: 2 - 3 days
- Model: 01096
VITEX-Light Acrylic Putty/light acrylic putty for building 750ml-01096
White, acrylic base, very light and high-coverage putty ready for use for filling and repairing in cracks and holes in walls, plasterboard and interior surfaces ceilings. It is simple to use, does not shrink, dries quickly, is rubbed and dyed with any color.
- For filling large and small holes and cracks
- Does not shrink, dries quickly, easily rubbed
PREPARATION
The surfaces must be clean, dry and smooth, without dust, oil or any flimsy materials.
Application
It is applied with a spatula without dilution. It is rubbed after about 1-2 hours with sandpaper and after being cleaned, stained with plastic or acrylic paints water or solvent of Vitex. It should not be applied at temperatures less than 5 Οc, greater than 35 οC and/or relative humidity above 80%. The product is dry to the touch in about 5-15 minutes depending on the absorbency of the surface. These times vary according to weather conditions (relative humidity and temperature). The tools are cleaned immediately after use with water and if needed with soap or detergent.
Surface Drying 5-15min
Dilution rate with water without dilution
Application with Spatula
