Menu
Your Cart

VITEX - Visto / White Water Soluble Acrylic Spastic Spastic Putty AC. and EXT. of a place - 73521

VITEX - Visto / White Water Soluble Acrylic Spastic Spastic Putty AC. and EXT. of a place - 73521
Tags: Colors 2, 70€
VITEX - Visto / White Water Soluble Acrylic Spastic Spastic Putty AC. and EXT. of a place - 73521
2.70€
Ex Tax: 2.18€
  • Stock: 2 - 3 days
  • Model: 73521

VITEX - Visto / White Water Soluble Acrylic Spastic Spastic Putty AC. and EXT. 1 KG - 73521

Spastylation (Paretin)White water-soluble acrylic spasty putty for indoor and outdoor surfaces. Ideal for stocking walls, visible concrete, ceilings, concrete, plasterboard and cement boards. It is simple to use and apply, dries quickly without popping, rubs easily and gives smooth final surface ready for painting.

White fine water soluble acrylic putty for indoor and outdoor surfaces. It has high resistance to humidity, temperature changes, alkalinity and is used for stocking walls, visible concrete, ceilings, concrete, plasterboard and cement board. It is simple to use and apply, dries quickly without popping, rubs easily and gives smooth final surface ready for painting.

• White acrylic spatyl putty
• Ideal for stocking walls, visible concrete, plasterboard etc.

SHADES OF

Available in white.

PRE-WORK
Surfaces must be clean, dry and smooth, dust-free, oily or any flimsy materials.

Application
In a clean bucket with 7-7.5 Kg of clean water and under continuous stirring, add a 20 Kg visto sack until a homogeneous lump-free mass is created (a ratio of about 2.5 parts of dust to a water part). The ready mixture is working for about 2-3 hours. It is applied in two consecutive layers that are approximately 4-5 hours away from each other and a total thickness of 1-5 mm, with a spatula, trowel or airless pistol. Rubs after about 7-8 hours with sandpaper. The surface must be thoroughly dried, cleaned and before the paint is primed with 100% Acrylic Primer or Durovit or Acrylan Unco Eco. It must not be applied at temperatures below 5 °C, greater than 35°C and/or a relative humidity above 80%.
The product is dry to the touch in 2-3 hours and repainted after 4-5 hours, depending on the thickness of the layers. These times vary according to weather conditions (relative humidity and temperature).
The tools are cleaned immediately after use with water and if necessary with soap or detergent.




ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
TYPEACRYLIC