BISON SOWS ANTI-MOLD SHIELD AGAINST MOLD 500ml 25473

---

investments, etc. It is applied to all porous substrates, such as wallpapers, walls (painted), ceilings, tiles, joints, plasterboard, plasterboard, limestone, plasterboard and wood. UNSUITABLE FOR Do not use it on non-porous materials, including textiles,
of leather, plastic and glass.

IDIOS
· Active protection that lasts up to 2 years.
· Coverage: 6-10 m² surface area
· Prevents the growth of mold, fungus
· Ideal for living and hygiene areas

Preparation
Working conditions: Make sure that the surface you spray is completely clean, dry and free from dust, rust and grease. First remove all mold (traces) with bison antimuhlic spray & foam. Follow the usage information on the relevant packaging.

Surface requirements: Make sure that the surface you spray is completely clean, dry and free from dust, rust and grease. Follow the usage information on the relevant packaging.

Instructions:
Prepare the spray cap by rotating it by a quarter. Avoid splashing: always prepare first and only then spray. Spray the surface you are going to treat thoroughly and from a distance of 30 cm to form a film. Let dry.

After use, close the spray cover by turning the spray nozzle down a quarter. When the protective layer dries completely, it can then be painted or put wallpaper Wall.

Tip: First remove any remaining traces of mold using the Mildew Remover. Follow the instructions for use in the relevant package Let the surfaces cleaned earlier dry completely.

Attention points : It is always recommended to test the product on the surface you are going to process.When used in porous materials such as wood, slight discoloration may occur.

Do not use at temperature <5 °="" c.="" η="" φιάλη="" δεν="" μπορεί="" να="">

TECHNICAL SPECIFICATIONS
Key ingredient: Quaternary ammonium compound
Color: White (transparent)
Density: Approximately 1 g/cm³
Approximate pH value: Approximately 7