DUROSTICK DS-255 5Kg

Ready- to -use primer of special acrylic base, solvent-less, with quartz aggregates, enriched with additives. It is distinguished for its strong adhesion even on very smooth surfaces. It has excellent resistance to alkalis while it acts as a barrier of incoming moisture, protecting the building from unwanted damage. Due to its structure it does not prevent the transpiration of the surfaces. Necessary to ensure the adhesion of the base coat plaster, standard or traditional, on surfaces smooth or minimally absorbent. The DUROSTICK DS-255 is necessary on surfaces where the traditional cast plaster is attached to the Difficult, such as extruded or expanded polystyrene, which is placed for insulation on the facades of buildings. Prevents possible unsolder of plasters on internal and external surfaces from seismic vibrations as well as shrinkage of insulating materials. Due to its elasticity it absorbs the expansions and contractions created on insulated surfaces, pillars, concrete fronts with tangential masonry by brick, concrete, porobeton, concrete blocks, etc. is not affected by the permanent Moisture and not emulsified by rain, if the surfaces remain intact for a long time. 1. Surface Preparation

Surfaces that will be earthed must be dry and free from flimsy spots, powders, fats, etc.

2. Application

The DUROSTICK DS-255 is well mixed into its container before it is applied with a low speed drill. Dilute to 5% with clean water and coated with roller or paiga in one layer. After it is completely dry, the application of the basic layer plaster DUROSTICK D-40 Or the DUROSTICK D-42 waterrepellent single-layer plaster is followed.

Cleaning

The tools are cleaned with water and detergent after use.