RUBI - DELTA LEVELING KIT / DELTA LEVELING SYSTEM SET 1.5mm - 03957

RUBI - DELTA LEVELING KIT / DELTA LEVELING SYSTEM SET 1.5mm - 03957

The main function of the RUBI DELTA level system is to avoid the lip during the process of laying tiles on both floors and walls.

The DELTA level system also prevents the movement of the tiles during the setting of the glue, and during installation, the number of corrections to the position of the tile itself is reduced.

The basic principle of the DELTA level system is to pressurize the highest piece until its position matches the adjacent tiles, thus achieving a substantial improvement in the flatness of the surface.

RUBIs DELTA level system is a wedge and strip system, recommended for dimensions of 30x30 cm or larger and varying thicknesses up to 12, 15 or 20 mm, depending on the flange model used.

Using the RUBI DELTA level system is quick, easy and intuitive. Once installation is complete, the strips are removed by impact (kicking or hammering), always striking the strips in the direction of the joint.

DELTA level system wedges can be reused many times.

RUBI DELTA LEVEL SYSTEM pliers are designed for use in both horizontal (floor) and vertical (wall) tiling operations. The main function of the RUBI DELTA level pliers is to give the wedge the necessary pressure to allow the tile to be leveled. thus obtaining a perfectly flat surface.

Characteristics
Packed in a handy bucket.
Different models available:
3 mm strip for tiles from 6 to 15 mm.
1.5 mm/ 2 mm strip. for tiles from 11 to 20 mm.
Made of steel with ergonomic plastic handles.
Reusable.
6-position height adjustment depending on the thickness of the ceramic tile.
Protective sleeve on the clamp to prevent damage to the tile.
1 mm/ 1.5 mm and 2 mm strip. for tiles from 3 to 12 mm.
Made in PP.
The kit consists of 1 pliers, 100 strips and 100 reusable wedges.