RUBI - RC-10 Cement Remover Cleaner / Cement and Mortar Residue Cleaner 5lt - 22950

RUBI - RC-10 Cement Remover Cleaner / Cement and Mortar Residue Cleaner 5lt - 22950

RC-10 Cement Remover effectively removes cement and mortar residues that have adhered to the surface of ceramic tiles.
The main advantages of the RC-10 Cement Remover are its excellent desalination ability and fast action.
RC-10 Cement Remover is a product for cleaning cement residues, mortar, cement glue and any lime-based substance on porcelain tiles, polished tiles, rustic tiles and stoneware.
It is also suitable for on-site cleaning of rashes (salt) on uncovered brick walls, clay or tof terraces and other non-acid-sensitive materials.

For the correct implementation of the RC-10 Cement Remover, RUBI recommends the following steps:

1. Apply the product directly to the stain (clean if it is a concrete stain or mixing a part of the product with a part of water for rash stains).
2. Let the product act for 3 or 4 minutes (in places of mortar or cement the product will foam / bubble).
3. Rub vigorously with a cleaning brush or pad.
4. Rinse with plenty of water while continuing rubbing.
5. Dry with a cotton cloth. If dirt remains, repeat the procedure (for heavily layered areas, more than one application may be required).

RC-10 Cement Remover is a powerful acid-based desalination cleaner.
It has a pH between 0 and 1 and a density of 1.05 Kg/l.
The performance of the RC-10 will depend on how the product is applied, with an approximate yield of 2 m²/l if applied plain, approximately 12 m²/l if applied diluted with 1:1 water (dilution is recommended to clean the flare) or approximately 40 m²/l if applied diluted with 1:5 water for general cleaning. 
Note: Performances are indicative.

In order to apply the RC-10 Cement Remover correctly and safely, RUBI recommends that the following precautions be taken into account:

- Do not apply to acid-sensitive surfaces (marble, terrazzo, hydraulic mosaic and generally any kind of polished natural stone).
- Although this product can be used without problems on most ceramics and tiles, there are some old ceramics that have not been well vinified. Using the product on these ceramics can destroy the glaze, and therefore we recommend that you conduct a small test to evaluate the results first.
- Avoid contact of the product with metal surfaces (aluminum, stainless steel, iron, etc.).
- This product can spoil or destroy the pigments of some colored joints.
- Follow recommended application times. Longer application times can lead to the formation of corrosive vapors.

ALWAYS TAKE A TEST IN A SMALL HIDDEN AREA TO EVALUATE THE RESULTS.

Highlights of the product
Effectively removes excess cement and mortar from various floor materials

Materials
For porcelain, varnished ceramic tiles, rustic tiles and bricks made of baked clay.

Use
Apply the product directly to the stain (clean if it is a concrete stain or by mixing part of the product with water if it is a rash cleaning).
Let the product act for 3-4 minutes (over the stain or cement mortar - the product will foam/bubble).
Rub well with a brush or sponge
Rinse with plenty of water while constantly rubbing
Dry with a cotton cloth. if there is still an excess product repeat the procedure (for large areas more than one application may be required)

Features
Product specially made for cleaning cement, mortar, tile cement and any limestone base substance. 
Also suitable for on-site cleaning of rashes (salt) on brick walls, terraces or baked tiles, etc.