VITEX - Vito Eco / Plastic Eco White Paint 9lt - 06480

VITEX - Vito Eco / Plastic Eco White Paint 9lt - 06480

GENERAL CHARACTERISTICS

Plastic ecological paint for general interior use. It has high coverage and high efficiency. It spreads very well and gives a smooth matte surface. It is low-odor, as it does not contain dangerous compounds such as aromatic hydrocarbons, ammonia, free formaldehyde, heavy metals or alkylphenolethoxylates. It is certified according to the criteria of the EU Ecolabel Awarding Council.

Ecological
High coverage and high performance

NUANCES
Available in white, and in an unlimited number of shades through Vitexs Colorfull Tinting System.

PREPARATORY WORK
The surfaces must be clean, dry and smooth, free of dust, oil or any loose materials.For puttying holes and spatulating any cracks, Acrylic Building Putty or Visto is used.Old water-colored surfaces (with lime or glue) are primed with Acrylan Unco Eco.New surfaces of plaster, concrete, bricks, plasterboard, etc., as well as spatulated surfaces are primed with Acrylan Unco Eco or Blanco Eco.Surfaces soiled by nicotine, smoke, markers, coffees and other types of stains are primed with Blanco Eco.In the case of dark shades (medium base) on surfaces Blanco Eco should be applied first, as it is or slightly colored in the tone of the desired final shade.

APPLICATION
The product is thoroughly stirred before use. It is applied in two layers with a roller, brush or airless gun and diluted up to 10% with water. It should not be applied at temperatures lower than 5οC, higher than 35οC and/or relative humidity above 80%.The product is dry to the touch in 15-30 minutes and repainted after 3-4 hours. These times vary depending on weather conditions (relative humidity and temperature).After applying the paint, seal the container well and store it at temperatures between 5oC and 35oC for future use. Surfaces painted with Vito Eco are washed using a soft sponge with water and in case of stubborn stains with soft, colorless detergent, after at least three weeks from painting.The tools are cleaned immediately after use with water and if necessary with soap or detergent. Do not discharge washing fluids into the aquifer. Special handling of excess paints is required, not disposed of with household waste or poured. Seek advice from the local government on their disposal and collection.