DUROSTICK D-66 OFFICIAL 1KGR

Repairing, white resin putty, cement base, fibre-reinforced, enriched with ceramic pellets. It is distinguished for its high mechanical strengths, very good workability and the unbreakable adhesion to plaster and concrete. It does not sag, so it does not need a mould and does not allow the recurrence of cracks. Fills with a layer, cracks and holes of width 20 mm and depth 30 mm, presenting zero shrinkage

Suitable for the closure of cracks and holes from nails or upat in painted and unpainted walls of plaster and concrete. Ideal for repairing damage around window frames and prejars as well as broken edges in columns. It does not burst or create cracks when using nails or screws. Ready for use with its simple mixing with water, it is applied to exterior and interior spaces and withstand all weather conditions.

1. Surface Preparation

To ensure good adhesion of the material, the surfaces must be stable, free from powders, oils, fats and flimsy spots, while it is necessary to wetting them with water before application.

2. Application

Pour the powder in clean water, at a ratio of 1 kg powder/280-300 ml water and stir with a low-speed drill or a thin spatula, until a homogeneous, thickened mass without lumps is created, suitable for the filling. If a second coating is needed, it is recommended to apply after 3-4 hours without wetting. The material, after drying, can be smoothed with sandpaper where necessary.