VITEX - Platinum PU / Glossy White Ripolin Polyurethane 2,5lt - 13075

VITEX - Platinum PU / Glossy White Ripolin Polyurethane 2,5lt - 13075

Luxury polyurethane alkyd varnish paint of new composition suitable for indoor and outdoor use.
It is applied on all wooden surfaces, such as windows, doors, wardrobes, etc., as well as on metal surfaces. It has excellent
whiteness, coverage and high elasticity; Applied
Easily, spreads evenly, without leaving veins and splices
offering a superb finish. Exhibits excellent durability
over time, frequent washing and yellowing.
• Luxury polyurethane alkyd varnish paint
new composition
• Excellent stretching – working
• Glossy, satin and matte finish


NUANCES
White is available in glossy, satin and matte finishes, and in an unlimited number of shades through Vitexs Colorfull Tinting System.

PREPARATORY WORK

Surfaces must be clean and dry, free of oil or rust and sanded. The wooden surfaces, after the appropriate preparation (passing with Diaxyl colorless wood preservative or Diaxyl Extra for protection from fungi and insects, puttying, spatulating with Acrylic Building Putty and grinding), are primed with Velatura (Solvent). Then rub the surface with a suitable sandpaper and remove dust. Metal surfaces are primed with anti-rust primer (Anti-Rust Primer, New Type Minion or Metal Primer). Metallic glossy surfaces (galvanized, aluminum, etc.) are primed with Glossy Primer or Wash Primer.

APPLICATION

The product is thoroughly stirred before use. It is applied in two coats with a roller or brush with a 2% dilution with Brush Thinner Platinum Polyurethane - alkyd varnish paint luxury T 300 or airless gun with dilution 2% with Gun Thinner T 350. It should not be applied at temperatures below 5°C, greater than 35°C and/or relative humidity above 80%. The product is dry to the touch in 3-4 hours and repainted after 20-24 hours. These times vary depending on weather conditions (relative humidity and temperature). Surfaces painted with Platinum are washed after 30 days from painting. Rollers, brushes and stains on the floor are cleaned with Brush Thinner T 300 and then with soap or detergent. The guns are cleaned with T 350 Gun Thinner.