- Stock: 3
- Model: D-9 5Kgr
Brushable Waterproofing mortar suitable for application on external and internal surfaces of cement and clay. Waterproofs and protects the surfaces applied by adverse weather conditions. Available in brick color. 1. Tile roof Protection-Crack sealing
The DUROSTICK D-9 is suitable for the preventive securing of tightness and the coverage of possible capillary cracks in the points coated, evident mud of corphiades and acrokeratosis, as well as in cracked tiles.
Adding a D-20 Or durostop acrylic emulsion of DUROSTICK to the mixing water, in a ratio of 1:1, increases the elasticity of D-9, preventing the formation of new cracks due to contractions.
2. Prevent the outflow of salts from pots
The ceramic pots, planters and jars, with watering expel with moisture and salts, resulting in the appearance of white spots that "annoy" aesthetically their appearance. The coating internally with D-9 prevents the outflow of salts without affecting the plants.
1. Surface Preparation
48 hours after the completion of the tiled roof, we thoroughly corrode the visible mud of the corphiades and acrokeratosis. The wetting of the interior of the clay pots guarantees the best adhesion of the D-9.
2. Application
Pour the mortar into 1.5 lt of clean water, stirring with a low-speed drill with the appropriate accessory until a homogeneous mass is created without lumps that does not drip into the brush or the brush. The mixture remains working for 45 minutes. Apply 3 coatings of 1 mm each, with a difference of 1-2 hours
Between them. If the coating dries, we corrode the surface again. The surfaces in which the material has been recently applied should be protected from high temperatures, rain and frost.
1.3 kg/M2/mm layer thickness
