VITEX - Diaxyl Plus / Solvent Wood Impregnation Varnish No 2513 SKOURI WALNUTS 2,5lt - 15451

VITEX - Diaxyl Plus / Solvent Wood Impregnation Varnish No 2513 SKOURI WALNUTS 2,5lt - 15451

Protective and decorative polyurethane-based solvent wood varnish for interior and exterior surfaces. Due to its special composition, it effectively prevents the growth of mold and fungi in its membrane. It impregnates wood, forming a thin film but at the same time allowing it to breathe. It follows the contractions of wood due to its elasticity and protects it from moisture and  UV radiation.

•For indoor and outdoor use, reinforced with polyurethane
• With special UV filters for maximum resistance to solar radiation
• Impregnates wood, forming a thin film while allowing it to breathe

NUANCES

Available colorless and in 11 ready-made natural shades.

FINISH

Available in Natural finish.

PREPARATORY WORK

Surfaces should be clean, dry, free of resin, oil or old varnishes. On new wooden surfaces, Diaxyl Extra wood preservative is applied to protect against fungi and insects.

 
APPLICATION

The product is thoroughly stirred before use. It is applied in one or two layers with a brush, roller or gun without dilution. It should not be applied at temperatures below 5°C, higher than 35°C and/or relative humidity above 80% or when wood humidity exceeds 18%.

The product is dry to the touch in 2-3 hours and repainted after 24 hours. These times vary depending on weather conditions (relative humidity and temperature). The final shade depends on the natural color and absorbency of wood, as well as on the number of layers of Diaxyl Plus.

Rollers, brushes and stains on the floor are cleaned with Brush Thinner T 300 and then with soap or detergent. The guns are cleaned with T 350 Gun Thinner.