VIVECHROM - Vivedur Multiprimer Eco / Nanotechnology Silicone Acrylic Transparent Primer 1lt - 40626

VIVECHROM - Vivedur Multiprimer Eco / Nanotechnology Silicone Acrylic Transparent Primer 1lt - 40626

VIVEDUR MULTIPRIMER ECO is a water-based silicone acrylic primer for exterior and interior walls. It is micronized and therefore has greater penetration and stronger adhesion, offering excellent connectivity, strengthening porous surfaces such as plaster, concrete, gypsum boards, cement boards, putty, watercolor. It is hydrophobic, waterproofs surfaces and is breathable and has very good resistance to alkalis. It prevents the migration of salts from the wall to the surface of the finished paint. It is easy to work with and spreads wonderfully. It is an ideal ecological water primer for surfaces that will be painted with acrylic or plastic water-soluble paints. 

Type: Ecological, silicone acrylic, micronized primer Water nanotechnology Method of application: Roller, brush or airless gun. Dilution: Dilute with clean water up to 50% for exterior surfaces and up to 100% for interior surfaces and stir well before use. Yield: Approximately 13-15 m² per liter per layer, depending on surface absorbency and dilution rate. Drying: To the touch in 1 hour and repainted after 2 hours. These times vary depending on weather conditions (humidity, temperature). Storage: Store at a temperature of 5°C to 40°C. 

SURFACE PREPARATION

Surfaces must be clean, dry and free from defective or poor consistency materials, dust, oils and salts. ? Treatment such as dry scrubbing will create dust. Liquid scrubbing should be used where possible. Work in a well-ventilated area. Use appropriate means to protect breathing. ? New very alkaline concrete or plaster surfaces should be primed after about a month. ? For puttying and spatulating surfaces: Use Vivechrom PUTTY. 

APPLICATION

? Dilute with clean water up to 50% for external surfaces (13-15 m²/Lt) and up to 100% for interior surfaces (16-20 m²/Lt) and stir well before use. ? Apply 1 hand VIVEDUR MULTIPRIMER ECO. ? Ensure good ventilation during application and drying. ? Application and drying at a temperature of 10°C to 35°C. • Minimize color waste by calculating the amount of paint you will need.

HEALTH, SAFETY AND ENVIRONMENTAL PROTECTION DIRECTIVES

• Keep out of reach of children • If seeking medical advice, carry the product container or label with you • Do not come into contact with eyes, skin or clothing • Call the poison control center or a doctor if you feel unwell • Contains 1,2-benzisothiazol-3(2H)-one. May cause an allergic reaction • Do not empty it into the drain • Disposal of the contents and container in accordance with applicable legislation • Tel. Poison Control Center: 210 7793777.