VITEX - HyRoof Primer Hybrid PU / Transparent Hybrid Water Primer 15lt - 04325

VITEX - HyRoof Primer Hybrid PU / Transparent Hybrid Water Primer 15lt - 04325

It penetrates, waterproofs and stabilizes new surfaces or old ones with pre-existing waterproofing. It exhibits strong adhesion to concrete, bituminous membranes, cement slabs, acrylic, polyurethane paints, etc. It is slightly colored in order to easily detect the primed surface. It is user-friendly and environmentally friendly due to its very low content of Volatile Organic Compounds (VOC).

Hybrid polyurethane primer
Penetrates, waterproofs and stabilizes surfaces
Slightly pigmented

NUANCES
Transparent.

PREPARATORY WORK 

Surfaces must be clean, dry and smooth, free of dust, or any loose materials. In case of cracks, use Vitex Elastomeric Putty to cover them.

APPLICATION 

The product is thoroughly stirred before use. It is applied in one layer with a roller, brush, brush, patroga or airless gun evenly over the entire surface to be waterproofed, without dilution. It should not be applied at temperatures below 5°C, greater than 35°C and/or relative humidity above 70% or if there is a risk of rain or frost in the next forty-eight hours. The product is dry to the touch in 45 minutes and repainted after 2-3 hours with HyRoof Hybrid PU roof sealant. These times vary depending on weather conditions (relative humidity and temperature). The tools are cleaned immediately after use with water and, if necessary, with soap or detergent.